home *** CD-ROM | disk | FTP | other *** search
- Path: nntp.snfc21.pbi.net!usenet
- From: brentm@pbinet.com (Brent Mosbrook)
- Newsgroups: comp.dcom.modems
- Subject: Re: Zyxel Elite 2864
- Date: 7 Apr 1996 19:27:19 GMT
- Organization: None Whatsoever!
- Distribution: world
- Message-ID: <4k94un$pc5@nntp.snfc21.pbi.net>
- References: <4k3re2$5ik@betty.philabs.research.philips.com>
- Reply-To: brentm@pbinet.com
- NNTP-Posting-Host: ppp-67-41.anhm01.pbinet.com
- X-Newsreader: News for Windows NT X1.0-75
-
- In article <4k3re2$5ik@betty.philabs.research.philips.com>
- ms1@philabs.research.philips.com (Mitch Stein) wrote:
-
- > First, where is Brent Mosbrook, have not seen
- > Zyxel on this group in a while?
-
- I'm still here, though not in an official capacity as "ZyXEL".
- I am no longer working there, having accepted a position in
- product marketing at another local company, AST.
-
- > Secondly, I cannot seem to connect to My ISP's
- > Boca v34 modems at all and to there US Robotics above
- > 19.2k baud. But if I call one of there non local to me
- > access numbers some 60 miles away I can connect to their
- > Mulitech modems at at least 24kbaud. Is there an optimum
- > init string so I may use a local number?
-
- I would suggest using the very latest firmware from the U.S. Web/FTP site.
- you may find later firmware elsewhere in the world, but the reason it isn't on ZyXEL's
- corporate site is that it was found to have specific problems, or doesn't work as well as
- previous versions.. This problem should be cleared up by now, as the firmware release
- policy is to be strictly enforced now.
-
-
- With 1.12 firmware, you should see improved performance. I would suggest looking at the
- AT#E1 report to check the signal/noise ratio, as well as the RX strength.
-
-
- --
- Brent Mosbrook
- brentm@pbinet.com
-
-